|
|
ARMORFORM is positioned on the subgrade to be protected, where it is inflated with pumpable fine aggregate concrete (structural grout) to form an erosion control mat. ARMORFORM mats should be placed on a site-specific filter fabric.
ARMORFORM is available in various styles and thickness'. Uniform Section Mat (USM), Filter Point Mat (FPM), Articulating Block Mat (ABM) and Armorbags are the four standard styles of ARMORFORM. For the majority of applications, one of the standard styles and thickness' of ARMORFORM should prove adequate, however, customized configurations and/or thickness' can be manufactured. If required, ARMORFORM mats can be produced to inflate to more than 24 inches thick or even to allow revegetation of an eroded embankment.
|